| 2005 Motor | |
| Block | 1985 Chevy 350, 4 bolt main, +.040" bore, -.010" deck, align bored 14010207 |
| Crankshaft | Forged 350, rod & main journals -.010", balanced 3941182 |
| Rods | Scat 6000H, 6.000" H-beam, floating pins |
| Rod bolts | ARP 7/16" 8740 cap screws |
| Main bolts | ARP 134-5202 |
| Pistons | SRP 140679, 13 to 1 dome, +.040", double Spirolock |
| Piston rings | Speed Pro R9771-45, +.040" file-fit |
| Rod bearings | Clevite CB-663H-10 .010" under |
| Main bearings | Clevite MS-909H-10 .010" under |
| Cam bearings | Clevite SH1349S |
| Oil pump | Melling high volume M55HV |
| Oil pump shaft | Moroso 22070 heavy duty |
| Oil pump stud | ARP 230-7001 |
| Oil pan | Moroso 21308, 7qt w/ scraper and trap doors |
| Oil pan pickup | Moroso 24308 |
| Oil pan dipstick | Moroso 25970 |
| Oil filter adapter | Summit SME-2015, Non-bypass oil filter adapter |
| Timing chain/gears | Cloyes True Roller 9-3100 |
| Timing pointer | Jeg’s 555-51262 |
| Damper | Professional Products 90000, 6 ¾”, SFI certified |
| Damper bolt | ARP 134-2501 |
| Crank pulley | Moroso 64050 aluminum |
| Timing cover | Milodon 65555 reinforced cam thrust surface |
| Camshaft | Herbert C6F Solid Roller 299/308 @ .625/.625 lift |
| Camshaft lock plate | Summit G1792 |
| Camshaft thrust bearing | Summit Torrington roller bearing G1790 |
| Camshaft button | Summit Needle roller bearing G003 |
| Lifters | Herbert TCV Solid Rollers, vertical bar |
| Pushrods | Manley 25716, 4130 swedged ends, 5/16", 8.000" |
| Cylinder heads | World Products Sportsman II 11150, 200cfm, unported |
| Cylinder head bolts | ARP 134-3601 |
| Intake Valves | Manley Raceflo 11566, 2.02 / 11/32” |
| Exhaust Valves | Manley Raceflo 11565, 1.60 / 11/32” |
| Valve springs | Isky 9315 1.550" dual w/damper |
| Retainers | Trick Titanium R10-1.550T |
| Valve Locks | Comp Cams 614-16, 10 degree +.050" spring height |
| Valve seals | Crane 99820-16 .531" teflon |
| Rocker arms | Crane 11752, 7/16" Gold Race aluminum roller rockers |
| Rocker studs | ARP 7/16" 100-7101 |
| Guide plates | Milodon 10750 |
| Valve covers | Comp Cams VH030Y tall polymer |
| Pan Evacuation | Mr.Gasket 6002 |
| Intake manifold | Edelbrock Victor Jr. 2900 CNC port matched |
| Carburetor | Holley 750 cfm double pumper, ProForm body and metering blocks |
| Carburetor bracket | AED cable/return spring mount |
| Distributor | MSD Pro Billet 85551 |
| Distributor gear | Herbert D11979 Bronze .500" |
| Distributor cap | MSD HEI-style terminals 8433 |
| Ignition wires | Moroso Blue Max, 8mm 73225 |
| Spark plugs | Autolite 24, gapped at .045” |
| Gasket set | Fel-Pro KS2600 |
| Head Gaskets | Fel-Pro 1003, .041" thick, 4.166" bore, 9.1cc volume |
| Intake Gaskets | Fel-Pro 1205 |
| Fuel pump block-off | Mr.Gasket 1515 |
| Water pump | ProForm 66225B electric/aluminum |
| Assembly | Deck height = 0.0" |